apartment Compactor
  • CA.5 1/3 Yard Space Saver Single Cylinders

  • CS.5 1/2 Yard Space Saver w/Twin Cylinders

Features
  • UL/CUL listed Control Panel

  • Can be equipped with single side latching for easy and quick container removal.

  • ANSI Z245.2 & ANSI Z245.21 Compliant

  • Quiet Operating Vane Pump

  • Key operated controls

  • Can be equipped with high-rise chute hoppers, ground feed hoppers, and any other special installation solution requirement

  • Space Saver

  • Special modifications quoted upon request

Compactors

Cram-A-Lot Apartment Compactors are designed to pack into a 2yd or 3yd Front Load or Rear Load container where overall space utilization is critical

These powerful units are the perfect solution for high-rise apartments, hotels, hospitals, and office buildings and anywhere else trash space is very limited

Design Features
  • Rugged Construction provides long life

  • Compaction ratios average 4 to 1, depending on material

  • Excellent Compaction of dry and/or wet material

  • Ideal for apartments buildings, hotels, retail shops or anywhere space is Limited

Loading Capabilities
  • Load from ground, off a dock, multi-story chutes or through the wall

Compactors
Compactors Specifications Compactors Specifications
Specifications
CA-.5 Specifications CS-.5 Specifications

GENERAL:

GENERAL:

Dimensions Dimensions
Length 72" Length 48"
Width 40" Width 40"
Height 42" Height 41-1/2"
Clear Top Opening 20 L x 27 W Clear Top Opening 21 L x 28 W
Load Height Min 37-1/2 Load Height Min 39-3/4
Cycle Time 38 seconds Cycle Time 14 seconds
Ram Force normal 13,800 lbs Ram Force normal 14,300 lbs
Maximum 17,500 lbs Maximum 16,400 lbs
Ram Penetration 5.5 " Ram Penetration 5.5
Ram Face Dimensions 29-3/4 W x 18 H Ram Face Dimensions 29-3/4 W x 18-3/4 H
Weight 1,840 lbs with hopper Weight 1,186 lbs
WASTEC Rated .27 CU YDS WASTEC Rated .26 CU YDS

CONSTRUCTION:

CONSTRUCTION:

Chassis Floor 1/4" Steel Plate Chassis Floor 1/2" Steel Plate
3 C-Channel 3 C-Channel
Sides 1/4" Steel Plate Sides 7 gage
4 x 4 x 3/16 Steel Tube 4 C-Channel
4 C-Channel Presshead Top 7 gage
Presshead Top 3/16 Steel Plate Sides 1/4" Steel Plate
Sides 1/4" Steel Plate Face 1/2" Steel Plate
Face 3/8 Steel Plate Bottom 1/2" AR Steel Plate
Bottom 3/8 AR Steel Plate Guides UHMW Pads
Guides HMW Pads Breaker Bar 5 x 3-1/2 x 3/8 Steel Angle
Breaker Bar 5 x 3-1/2 x 3/8 Steel Angle

ELECTRICAL:

ELECTRICAL:

Motor 5 hp
Motor 3 hp Voltage 208-230/460 VAC 60 Hz
Voltage 208-230/460 VAC 60 Hz Three Phase
Three Phase Optional Voltage 230 VAC 60 Hz Single Phase
Optional Voltage 230 VAC 60 Hz Single Phase

HYDRAULIC:

HYDRAULIC:

Pump Type Vane
Pump Type Vane Pump Capacity 6 gpm
Pump Capacity 4.5 gpm Tank Capacity 11 gal
Tank Capacity 11 gal Hydraulic Cylinder (2) Bore 2-1/2"
Hydraulic Cylinder Bore 4" Stroke 18"
Stroke 28" Rod 1-1/4"
Rod 2" Operating Pressure Normal 1,750 psi
Operating Pressure Normal 1,100 psi Maximum 2,000 psi
Maximum 1,400 psi