KP2HT Self-Contained Compactor w/ Hydraulic Tailgate

Eliminating Costly Turn-arounds

K-PAC's KP2HT Self-Contained compactor is an excellent choice where vehicle maneuvering space is limited. Ideal for chute fed and dock fed applications. The innovative high-tail design allows the user to have the advantage of being able to feed it from a dock or from under a chute without having to pay their hauler extra to turn the compactor around.

Compactor

KP2HT Features

  • 10 HP TEFC 3 Phase 208/230/460
  • Key Switch, Start & Stop Buttons
  • Electrical interlock system prevents operator injury
  • Exclusive 41” X 67.5” feed opening for large, cumbersome items
  • Hi-Definition Plasma-cut provides tighter tolerances for a more refined product
  • Multi-cycle timer and 80% light
  • Head sub-floor allows liquids and sludge to return to the compactor container
  • Charge chamber floor is AR plate
  • Baffled reservoir reduces heat in the oil and increases pump longevity
  • Wheels have an exclusive bolt and pin system for reduced repair costs
  • 9.75" wheels for better support and stability
  • Multi-weight ATF Dexron III
  • One year parts and labor warranty
  • "Center" wheels for a better seal*
  • Meets all ANSI Z245.2 standards
  • UL listed control panel

Full “Closed-Cell” Neoprene Door Seal

To assure clients of a liquid tight door, K-PAC borrowed from the science of the U.S. Navy and uses the same "closed cell neoprene" seal material as used on nuclear submarine doors. The superior seal material along with K-PAC's unique channel and blade system deliver a door rated the best in the industry by knowledgeable users. It's the little details that make K-PAC equipment the best in the industry.

Compactor

Heavy-Duty Dual Ratchet Latch System.

This pulls the door tightly and evenly against the door seal while an innovative latching system features an adjustable stop to prevent over compression and damage to the seal. And for models without the splash pan, we have engineered in an extra set of wheels at the joint between the body and the packing head for a superior seal against leakage and flexing.

Compactor

Fully Supported & Guided Ram

In order to enhance the charge chamber’s floor life cast iron shoes requiring no lubrication run in a formed track on replaceable steel wear strips. In addition, with the use of four sets of pads on the side & the base of the shoes, ram chatter and maintenance is virtually eliminated. AR plate is also used as the floor.

Compactor

The Optional Splash Pan

The Splash Pan provides added protection by offering the hauler cleaner and safer conditions when emptying the compactor. (Splash pan as shown on a KP1HT)

Compactor

Dimensions and Specifications

Loading height 44" Normal pressure 1,850 PSI
Cleartop opening 32"L x 46"W Max. pressure 2,100 PSI
Ram penetration 13" Normal packing force 39,700 pounds
Ram face 22.5"H x 47.75"W Max. packing force 45,100 pounds
Motor 5HP 1-220 or 3-208/230/460 Normal ram face pressure 36.8 PSI
Pump 11 GPM (Hi-Lo) Max. ram face pressure 41.8 PSI
Cylinders 4" bore x 37" stroke x 2 1/2" rod Cycle time 37 seconds