• The X-Press Pack is the easiest compactor on the market… just install it and start saving!!

  • UL/CUL listed Control Panel

  • Liquid tight compactor/container

  • 4 or 6 cubic yard front load container

  • Remote Power Unit

  • Large 46 x 21 Charge Opening

  • Low loading height for easily loading

  • Optional chute fed systems available

  • Fully (UHMW) guided & supported ram

  • Fixed breaker bar teeth aid in trash retention

  • ANSI Z245.2 & ANSI Z245.21 Compliant


This compact self-contained unit offers the same liquid tight containment as a standard size compactor but in a more compact size for space limitations. Designed to offer the same benefits of a larger unit with it's optional chute fed or hopper fed system.

Ease of usage makes it a perfect portable compactor ready to use and requires no additional sight prep such as concrete pad, anchors or channel guides.

Design Features
  • Rugged Construction provides long life

  • Can easily be used in long or short term locations

  • Eliminates the unsightly mess of spillage by hauler

  • Excellent Compaction of dry and/or wet material

  • Compaction ratios average 4 to 1, depending on material

  • Ideal for Resturants, Fast Food locations, Shopping Centers, Supermarkets, Hospitals, Schools, Nursing Homes, and hotels

Loading Capabilities
  • Load from ground, off a dock, or through the wall

User Friendly
  • Container lid automatically unlocks when container is emptied and locks when returned

Self Contained Unit
  • Designed for limited space locations

Dimensions Length 96" Motor 3 hp
Width 81" Voltage 208-230/460 VAC 60 Hz Three Phase
Height See Chart Optional Voltage 230 VAC 60 Hz Single Phase
Clear Top Opening 21" L x 46" W
Minimum Load Height 32" HYDRAULIC:
Cycle Time 27 seconds Pump Type Vane
Ram Force Normal 18,300 lbs Pump Capacity 3 gpm
Maximum 19,500 lbs Tank Capacity 14 gal
Hydraulic Cylinder(2) Bore 2-1/2"
Ram Penetration 6" Minimum Stroke 18"
Ram Face Dimensions 48" W x 19" H Rod 1-1/4"
Weight See Chart
WASTEC Rated .41 CU YDS Operating Pressure Normal 2,250 psi
Maximum 2,400 psi
Container Floor 11 gage
Sides 11 gage
Presshead Top 3/16" Steel Plate
Sides 3/16" Steel Plate
Face 1/4" Steel Plate
Chassis Floor 3/8" Steel Plate
XP-4Y-FL 58 7/8” 2,700 lbs
XP-6Y-FL 76 7/8” 2,800 lbs
3" C-Channel
Sides 3/16" Steel Plate
3" C-Channel